Crossbeam - XOS - Add/Delete SNMP Trap Receiving Target Host - CLI

In Crossbeam XOS appliance, it's possible to configure more than one SNMP trap received target host. This example covers deletion of an existing SNMP trap receiving target host and adding a new one.

Running-configuration need to be copied to startup-configuration for the configuration change to be persistent (survive reboot).

Syntax:

configure snmp-server [no] host <xxx.xxx.xxx.xxx> traps version <1c|2c> <community string>

Example:

!! Existing SNMP trap receiving target host configuration !!

Crossbeam-XOS9.0.3# show snmp hosts
SNMP Traps Host IP-addr : 10.101.43.20
UDP Port                : 162
Community-string        : MY-SNMP
SNMP version            : SNMPv2c
SNMP Notify Type        : traps
Crossbeam-XOS9.0.3#

!! [no] form is used to delete SNMP trap receiving target host  !!

Crossbeam-XOS9.0.3# configure snmp-server no host 10.101.43.20 traps version 2c MY-SNMP
Crossbeam-XOS9.0.3#

!! After deleting SNMP trap receiving target host  !!

Crossbeam-XOS9.0.3# show snmp hosts
Crossbeam-XOS9.0.3#

!! Adding new SNMP trap receiving target host !!

Crossbeam-XOS9.0.3# configure snmp-server host 10.200.200.200 traps version 2c MY-NEW-SNMP
Crossbeam-XOS9.0.3#

!! After adding new SNMP trap receiving target host !!

Crossbeam-XOS9.0.3# show snmp hosts
SNMP Traps Host IP-addr : 10.200.200.200
UDP Port                : 162
Community-string        : MY-NEW-SNMP
SNMP version            : SNMPv2c
SNMP Notify Type        : traps
Crossbeam-XOS9.0.3#

!! Save configuration changes.[*wr="copy running-config startup-config"]  !!

Crossbeam-XOS9.0.3# wr
Saving configuration ... Please be patient...
.
Crossbeam-XOS9.0.3#