Juniper - SRX - Check Cluster Status - CLI

Syntax:

show chassis cluster status

 

Example:

• When both the cluster members are up and functional, the output will be as follows (Primary & Secondary).

admin@Juniper-SRX> show chassis cluster status    

Cluster ID: 1

Node                  Priority          Status    Preempt  Manual failover

Redundancy group: 0 , Failover count: 0

   node0                   200         primary        no       no  

   node1                   100         secondary      no       no  

Redundancy group: 1 , Failover count: 0

   node0                   200         primary        no       no  

   node1                   100         secondary      no       no  

{secondary:node1}

admin@Juniper-SRX>

---

• If a cluster member is unavailable or down, it's status will be displayed as "Lost" just like in the below example.

admin@Juniper-SRX> show chassis cluster status

Cluster ID: 1

Node                  Priority          Status    Preempt  Manual failover

Redundancy group: 0 , Failover count: 1

   node0                   200         primary        no       no  

   node1                   0           lost           n/a      n/a

Redundancy group: 1 , Failover count: 1

   node0                   200         primary        no       no  

   node1                   0           lost           n/a      n/a

{primary:node0}

admin@Juniper-SRX>

---