Check Point - Nokia IPSO - View Static Route Configuration - CLI

Syntax:

The syntax to view static route configuration of Nokia IPSO appliance is as follows,

netstat -rn

Other possible parameter/filters that can be used with "netstat" command are below,

netstat [-Aan] [-f address_family] [-M core] [-N system]
netstat [-bdghimnrs] [-f address_family] [-M core] [-N system]
netstat [-bdn] [-I interface] [-M core] [-N system] [-w wait]
netstat [-M core] [-N system] [-p protocol]

Example:

Nokia-IPSO[admin]# netstat -rn

Routing tables:
 

IPv4: instance 0 name "default"
Destination        Gateway            Flags     Refs     Use        Netif Expire
default            200.20.20.2        CU          0        0     eth-s1p1c0
0.0.0.0                               CU          0        0
10/8               10.100.1.100       CU          0        0     eth-s1p2c0
10.10.20.20        172.20.100.1       CU          0        0     eth-s2p3c0
10.100.60.63       172.20.100.1       CU          0        0     eth-s2p3c0
10.100.60.93       172.20.100.1       CU          0        0     eth-s2p3c0
10.100.60/24       172.20.100.1       CU          0        0     eth-s2p3c0
10.101.192.0/27    172.20.100.1       CU          0        0     eth-s2p3c0
10.116.1/24        172.20.100.1       CU          0        0     eth-s2p3c0
10.116.2/24        172.20.100.1       CU          0        0     eth-s2p3c0
10.116.3/24                           CGUX        0        0     eth-s1p2c0

IPv6: instance 0 name "default"
Destination        Gateway            Flags     Refs     Use        Netif Expire
default                               RCU         1        0
::/96                                 CU          0        0
::                                    CU          0        0
::1                ::1                CG          0        0
::ffff:0:0/96                         CU          0        0
ff00::/8                              RCU         0        0
ff02::1                               CDU         0        0

Nokia-IPSO[admin]#